Volkswagen Jetta 2005 Workshop Manual page 288

Jetta 2005 ➤ , Bora 2006 ➤
Electrical System - Edition 05.2005
– Remove front right wheel housing liner ⇒ General body re‐
pairs, interior; Rep. Gr. 66 ; Wheel housing liner; Removing
and installing front wheel housing liner; Removing .
– Drill out both pop rivets -arrows- using drill -VAS 5134- and ∅
6 mm twist drill.
– Pull alarm horn -H12- -1- in -direction of arrow- out of the
aperture in the bodywork.
– Pull connector off -2-.
Installing:
Note
Remove all metal particles caused during the drilling.
– Perform measures for corrosion protection ⇒ General Infor‐
mation; Body Repairs, General Body Repairs .
– Fit connector to the alarm horn -H12- .
– Insert clip -2- of alarm horn -H12- -3- into the aperture in the
bodywork -1-.
– Secure alarm horn -H12- with pop rivet pliers -VAS 5072- .
10.5.2 Checking alarm horn -H12-
The alarm horn -H12- can be tested using final control diagnosis
from convenience system central control unit -J393- .
280
Rep. Gr.96 - Lights, lamps, switches - inside