– Unscrew earth wire securing nut -1- and place earth wire -2-
to one side.
– Remove starter from vehicle upwards.
Installing:
Installation is carried out in the reverse order. When installing,
note the following:
– Tighten threaded connections to specified torque settings
⇒ page 97
.
7.2.3
Vehicles with 2,0 l FSI engine
Special tools and workshop
equipment required
♦ Torque wrench -V.A.G
1331-
♦ Torque wrench -V.A.G
1332-
♦ Spring-type clip pliers -VAS
5024-
Removing:
– Disconnect the battery
⇒ page 29
.
Jetta 2005 ➤ , Bora 2006 ➤
Electrical System - Edition 05.2005
43
7. Starter