– Unscrew securing nut -1- from upper starter securing bolt.
– Remove wiring retainer -2-.
– Remove upper securing bolt of starter -arrow-.
– Unscrew earth wire securing nut -1- and place earth wire -2-
to one side.
– Remove starter from vehicle upwards.
Installing:
Installation is carried out in the reverse order. When installing,
note the following:
– Tighten threaded connections to specified torque settings
⇒ page 97
.
Jetta 2005 ➤ , Bora 2006 ➤
Electrical System - Edition 05.2005
47
7. Starter