Honeywell ADEMCO VISTA-12A Installation And Setup Manual page 36

Installation and Setup Guide
Table of Device Addresses
This Device
RF Receiver
AUI 1
AUI 2
Alternative Communication
†
Media (ACM)
Telecommand Voice Module
Zone Expanders** (4219/4229):
zones 17 - 24
Relay Module (4204/6164):
Keypads:
keypad 1
keypad 2
keypad 3
keypad 4
keypad 5
keypad 6
keypad 7
keypad 8
5800TM Module
ACM devices include: 7845i Ethernet Interface Internet/Intranet, AI4164RS/AI4164ETH
†
RS485/Ethernet Eureka Network Interface
†† Addressable devices are identified by "1" plus the device address when reporting. Enter a report
code for zone 91 to enable addressable device reporting (default = reports enabled). See field *199
for addressable device (ECP) 3-digit/2-digit identification keypad display options.
** or 6164 Keypad using zones; 08 = zones 17-20
3-10
Uses Address Reports as
00 100
01 101
02 102
03 103
17-23 117-123
08 108
13 113
16 116
17 117
18 118
19 119
20 120
21 121
22 122
23 123
28 n/a
††
Enabled By...
*56 zone programming: input device type entry
automatic if AUI enable field *189 enabled for AUI 1
automatic if AUI enable field *189 enabled for AUI 2
automatic if output to ACM field *29 enabled
same as keypad enables; see below
*56 zone programming: input device type entry, then:
automatic if zone no. 17-24 entered as AW type or
relay assigned
entered at device address prompt
data field programming as listed below:
always enabled for partition 1, all sounds enabled.
data field *190
data field *191
data field *192
data field *193
data field *194
data field *195
data field *196
automatic