Honeywell ADEMCO VISTA-12A Installation And Setup Manual page 102

Installation and Setup Guide
Compatible 5800 Series Transmitters Table
Model Product
5804BD Bi-Directional
Wireless Key
5806 Wireless
5807
Photoelectric Smoke
5808LST
Detectors
5809
Heat Detector
5816
Door/Window
5816MN
Transmitters
5816TEMP Low-Temp. Sensor
5817 Multi-Point Universal
Transmitter
5818 Recessed Transmitter
5819 Shock Processor
Transmitter
8-4
(cont'd)
Input Type Description
• House ID must be set.
BR Only
• Requires 5800TM Transmitter Module or 5883
Transceiver.
• Can indicate system status via its 2 LEDs and
built-in sounder.
• Has four pushbuttons, each with a unique
input (loop) code.
• Operates the system similarly to wired
keypads.
RF One-piece smoke detectors with a built-in
transmitter.
One-piece rate-of-rise heat detector with a built-
RF
in transmitter.
Has two unique input (loop) codes: one for a
RF
wired closed circuit contact loop; the other for its
built-in reed switch (used with a magnet).
Transmits a fault condition when temperature
RF
drops below 45°F.
Has three unique input (loop) codes: one for a
RF
"Primary" contact loop with programmable
options; the others for two "auxiliary" closed
circuit contact loops.
• Reed switch magnetic contact sensor; easily
RF
hidden in the frame and edge of a door or
window.
• Has a single unique input (loop) code.
• Connects to externally mounted inertia-type
RF
shock detector (not supplied).
• Has built-in tampered cover switch.
• Has 3 unique input (loop) codes:
Loop 1: Terminals for a wired, N.C. sensor
loop.
Loop 2: For a closed circuit contact loop using
Loop 3: Terminals for a wired, closed circuit
contact loop.
the built-in reed switch in conjunction
with a magnet.