Honeywell ADEMCO VISTA-12A Installation And Setup Manual page 103

Compatible 5800 Series Transmitters Table
Model Product
5819WHS Shock Processor
5819BRS Transmitter
5827 Wireless Keypad
5827BD Wireless Two-Way
Keypad
5849 Glassbreak Detector
5852
5890 PR Detector
5890PI
5899 Magnets
(cont'd)
Input Type Description
• Has built-in shock sensor.
RF
• Has built-in tampered cover switch.
• Has 3 unique input (loop) codes:
Loop 1: Built-in shock sensor loop wired to TB1
(normally closed).
Loop 2: For a closed circuit contact loop using
Loop 3: Externally wired, closed circuit loop
connected to TB2.
• Can be used to turn the burglary protection
Uses House
ID only
on and off.
• Features the same built-in panic functions as
wired keypads.
• The keypad is identified as zone "00" on
wired keypads when it transmits with a low
battery.
• Requires 5800TM Transmitter Module.
Uses House
• Operates the system similarly to wired
ID only
keypads, including panics.
• Can indicate system status via its 3 LEDs and
sounder.
• Includes 3 panic keys.
• House ID must also be set.
RF
• 5849 requires both sound and shock of
breaking glass to cause alarm to be
transmitted.
• 5852 uses intelligent acoustic processing.
RF or RM Dual-element passive infrared
detector/transmitter with built-in selectable
pulse count.
Note: There is a 3-minute lockout between fault
transmissions to conserve battery life.
Package of 4 magnets for use with 5816, 5817,
and 5819WHS transmitters.
Specifications & Accessories
the built-in reed switch in conjunction
with a magnet.
8-5