4.15.1 Rewind Hub, Clutch Assembly, And Spur Gear - Datamax I-Class Mark II Maintenance Manual

I-Class Mark II Maintenance Manual

4.15.1 Rewind Hub, Clutch Assembly, and Spur Gear

Removal:
1. Remove the Rewind Assembly; see Section 4.15.
2. Remove the E-Ring from the Rewind Hub shaft and remove the Inner Bearing.
3. Remove the Rewind Hub and the Outer Bearing from the Rewind Housing.
4. Remove the Rewind Hub Clutch from the Housing (and to remove the Spur Gear, remove the Screw that
secures the Idler Post to the Rewind Housing).
Replacement:
1. Reinstall the Outer Bearing in the Rewind Housing.
2. Position the Rewind Hub Clutch in the Rewind Housing.
3. Slide the Rewind Hub shaft through the Rewind Hub Clutch and Rewind Housing.
4. Reinstall the Inner Bearing and clip the E-Ring onto the Rewind Hub shaft (also, if removed, position the
Spur Gear onto the Idler Post and secure the post the Rewind Housing with the Screw).
5. Reinstall the Rewind Assembly; see Section 4.15.
Removal and Replacement
70