Table 3-8 Remote Access Page Field Descriptions - Proliphix NT10e Configuration Manual

Beta Draft Confidential
Use

Table 3-8 Remote Access Page Field Descriptions

Field
Alarm Notification
Remote Access
Remote Server Configuration
Server Address
Server Port
Interval
Basic Series Network Thermostat Configuration Guide, Release 3.0
Part No. 600-01000-201, Rev. 1
Table 3-8 to complete the Remote Access page fields.
Description
Controls whether the Remote Server service is enabled. Remote
access is the term used to describe the management and control
of the thermostat from networks outside the local subnet on
which the thermostat resides. Remote access provides the
thermostat with the ability to be controlled from either across the
Internet (with the Proliphix Web Server) or across multiple
corporate subnets to a private enterprise server.
Disable (default) – Remote Server function is disabled.
Enable – The thermostat is enabled to participate with a
Remote Server, either the Proliphix Remote Management
Server (See the Proliphix Installer Remote Management
Guide) or a private server, to provide remote access
capability.
The IP address of the Remote Server, either the Proliphix
Remote Management Server or a private server which supports
remote access. This field is pre-configured at the factory with
the IP address of the Proliphix Web Server.
207.58.145.109 – (default) Four field standard dot notation for
IP address designation.
The outgoing IP port number which is used to communicate to
the remote server. This field is pre-configured at the factory
with the IP port number of the Proliphix Web Server.
80 – (default) Port number of the remote server.
The time interval after which the thermostat intercommunicates
with the remote server to self identify itself as an active and
reachable thermostat. This interval is repeated continually as
long as Remote Access is enabled.
1 - 24 hrs – Default interval is 1 hour.
Remote Access Page
3-39