Alarm Status Screen; Table 2-7 Alarm Status Screen Options - Proliphix NT10e Configuration Manual

Beta Draft Confidential

Alarm Status Screen

The Alarm Status screen is a sub-screen of the
This screen displays the status of both the Low and High Temperature Limits alarm
and the Filter Reminder alert.
Figure 2-10 Alarm Status Screen
Table 2-7

Table 2-7 Alarm Status Screen Options

Field
Low Temp Limit
High Temp Limit
Filter Change Alert
Basic Series Network Thermostat Configuration Guide, Release 3.0
Part No. 600-01000-201, Rev. 1
lists the Alarm Status screen display options.
Displays
Temperature below which an alarm indication is set by the
thermostat.
Temperature above which an alarm indication is set by the
thermostat.
Indicates that the HVAC system requires service or the air
handler filter needs cleaning or replacement.
Status & Control Screen (page
OK – Temperature of thermostat has not dropped below that
set as Low Temperature Limit.
Not OK – Temperature of thermostat has dropped below
that set as Low Temperature Limit.
OK – Temperature of thermostat has not risen above that set
as the High Temperature Limit.
Not OK – Temperature of thermostat has risen above that
set as the High Temperature Limit.
OK – Maintenance is not required.
Now – Maintenance is required.
Thermostat Screen
2-9).
2-13