Figure - Proliphix NT10e Configuration Manual

Beta Draft Confidential
Day Class Schedules
Figure 3-5 on page 3-17
Class Schedules table. The TMI displays the day class periods and period start times
within each row of the table. The TMI also displays the heat and cool settings for each
period in each day class. Although the thermostat ships from the factory with pre-set
day class period temperature settings, you can change these settings by clicking on the
Day Class heading (i.e. In, Out, and Away).
Default Weekly Schedule
In Figure 3-5 on page
that you can use to apply the three day classes to each day of the week, for every week
of the year. The TMI applies this weekly template to every week in each month that is
visible in the Calendar View table at the bottom of the
3-17).
To edit the Default Weekly Schedule, click Edit Weekly Schedule and continue
with
Calendar View
The Calendar View table displays the day class settings for each day of the month.
You can modify any day class in the Calendar View table using any of the following
three methods:
Basic Series Network Thermostat Configuration Guide, Release 3.0
Part No. 600-01000-201, Rev. 1
displays In, Out, and Away Class Schedules in the Day
3-17, the Default Weekly Schedule table provides a template
Default Weekly Schedule (page
Click on the date within the calendar and continue with
page 3-23.
Click Edit Special Days and continue with
Setback Schedules Page
Setback Schedules Page (page
3-22).
Schedule Special Days
Schedule Special Days
on
on page 3-23.
3-19