Hvac Screen; Figure; Hvac Screen Example - Proliphix NT10e Configuration Manual

CHAPTER 2: Configuring the Thermostat Using the TDI

HVAC Screen

The HVAC screen is a sub-screen of the default
2-4). Most of the content on the HVAC screen is identical to the Thermostat screen
with the exception of the HVAC mode and fan setting controls.

Figure 2-4

Figure 2-4 HVAC Screen Example
Use
Table 2-3 HVAC Screen Options
Field
Fan State
Fan Control
HVAC Mode
Back
Cancel
2-6
shows an example of the HVAC Mode setting control screens.
Screen 1.1
Kitchen
73 Cool
Heat
o
Auto
68 72
Heat
F
Cool
Cool Off Day
Select Cancel
Table 2-3 to configure the HVAC options.
Description
Displays the current state of the fan. Options include:
Auto – The fan is controlled by either the heat or AC systems (or both).
On – Forces the fan to the on state independent of the heat or AC systems.
Displays the options for changing the state of the fan. See
Displays the options for changing the state of the HVAC System.
Auto – Automatic changeover between the heat or A/C systems.
Heat – Enables the heating system only. The A/C system is disabled.
Cool – Enables the A/C system only. The heating system is disabled.
Off – Disables the heating and A/C systems.
Returns to the default Thermostat screen.
Clears the current active menu.
Basic Series Network Thermostat Configuration Guide, Release 3.0
Beta Draft Confidential
Thermostat (Default) Screen (page
Kitchen
Screen 1.1
Kitchen
D
Part No. 600-01000-201, Rev. 1
73
C ool
Heat
o F
68 72
.5
Auto Cool
Day
Fan Mode Back
73 Cool
Heat
o
Auto
68 72
Heat
F
Cool
Cool Off Day
Select Cancel
Fan State.