CHAPTER 2: Configuring the Thermostat Using the TDI
Thermostat Control Screen
The Thermostat Control screen is a sub-screen of the
2-9). You can select the HVAC system type on this screen. This screen also displays
the status of the selected type along with the default settings.
To change specific parameters for each type, go to the
3-30). To initiate a software reset, press the left button and see
Thermostat (page
Figure 2-8 Thermostat Control Screen
Thermostat Control
HVAC Type: Fuel Burner
Heat Ctrl:
Cool Ctrl:
1
R eset
2-10
4-1).
1 H
1 C
Type
Back
2
Basic Series Network Thermostat Configuration Guide, Release 3.0
Beta Draft Confidential
Thermostat Control
HVAC Type: Fuel Burner
Heat Ctrl:
Cool Ctrl:
Part No. 600-01000-201, Rev. 1
Status & Control Screen (page
Advanced Settings Page (page
Resetting the
1 H
1 C
Heat Pump SS
Fuel Burner
Select
Cancel