Thermostat Management Interface (Tmi); Html Interface - Proliphix NT10e Configuration Manual

Beta Draft Confidential

Thermostat Management Interface (TMI)

The Proliphix Thermostat Management Interface (TMI) provides network
management capability to control your Proliphix thermostats. This section describes
the browser-based configuration using the TMI. Review the instructions in this section
prior to configuring your thermostat.

HTML Interface

To access the initial HTML page of the thermostat, enter the unique IP address
initially assigned via DHCP (see
browser window. For example:
http://192.168.111.100:80
Where 192.168.111.100 is a unique IP address initially assigned via DHCP and 80 is
the default (Proliphix assigned) Web HTTP port number. (If you are upgrading your
device from a previous version of Proliphix firmware, this port number may be
something other than 80. The old port number is carried forward after the firmware
upgrade.) After you enter these two fields into the browser, the system displays the
first TMI page.
Proliphix recommends that these parameters be fixed "statically" so that this
address can be bookmarked in your browser. Proliphix recommends that you
Tip
choose a unique static IP address assigned from outside the DHCP server pool of
addresses. See the
static IP address assignment.
Basic Series Network Thermostat Configuration Guide, Release 3.0
Part No. 600-01000-201, Rev. 1
page 3-2) and the Web HTTP port number in your
Network Settings Page (page 3-27)
Thermostat Management Interface (TMI)
for more information on
3-5