Special Days Examples; Special Days Table Page (Example 1) - Proliphix NT10e Configuration Manual

CHAPTER 3: Configuring the Thermostat Using the TMI

Special Days Examples

This section describes some examples of Special Days.
Example 1
Figure 3-10 on page 3-24
21, 2007 from an In Day Class (i.e. a typical work day) to an Out Day Class. This
represents a change to the default weekly schedule for the last week in December and
requires a single Special Days entry in the table.
You can enter this information in the Special Days table using either of the following
methods:
Figure 3-10 Special Days Table Page (Example 1)
3-24
shows an example of changing the Day Class on December
Click directly on the date on the Calendar View. (See
Figure 3-10 on page 3-24
fields in the row except the Day Class setting. One day is the default duration, but
you can change this field to any number of days less than the 60 day maximum.
The Setback Schedules Page (page 3-17)
Click Edit Special Days. (See
page 3-24 appears. Configure all fields in the Special Days Table. Click Submit.
The Setback Schedules Page (page 3-17)
Basic Series Network Thermostat Configuration Guide, Release 3.0
Beta Draft Confidential
appears and the TMI automatically populates all the
appears.
Figure 3-5 on page
appears.
Part No. 600-01000-201, Rev. 1
Figure 3-5 on page
3-17.) Figure 3-10 on
3-17.)