Usage Counters Page - Proliphix NT10e Configuration Manual

CHAPTER 3: Configuring the Thermostat Using the TMI

Usage Counters Page

Usage counters, for example: Heat1, Cool 1, and Aux Heat provide a
minute-accurate duration activity for all relays.
The usage counters that are displayed depend on how your thermostat is
configured.
Note
Each counter directly accumulates the number of minutes each relay has been active.
Only the Admin(istrator) account can reset the current value for each of the counters
to zero. To reset the Fan Usage counter, click the Filter Replaced check box on the
General Settings Page (page
Figure 3-19 Usage Counters Page
3-42
Beta Draft Confidential
3-13).
Basic Series Network Thermostat Configuration Guide, Release 3.0
Part No. 600-01000-201, Rev. 1