Table 3-9 Usage Counters Page Field Descriptions - Proliphix NT10e Configuration Manual

Beta Draft Confidential
Use

Table 3-9 Usage Counters Page Field Descriptions

Field
Relay Counters
Heat1
Aux Heat
Cool1
Fan
Counter Status and Control
Include Heat Usage in Fan
Usage
Last Counter Reset
Basic Series Network Thermostat Configuration Guide, Release 3.0
Part No. 600-01000-201, Rev. 1
Table 3-9 to complete the Usage Counter page fields.
Description
Displays the first stage Heat1 relay minute activity counter. The
Admin account user can reset this field by setting Reset
Counters in the Last Counter Reset field.
Displays the first stage Aux Heat relay minute activity counter.
The Admin account user can reset this field by setting Reset
Counters in the Last Counter Reset field. Note: This field is
available in heat pump mode only.
Displays the first stage Cool1 relay minute activity counter. The
Admin account user can reset this field by setting Reset
Counters in the Last Counter Reset field.
Displays the Fan relay minute activity counter. Can be reset only
by resetting the Filter Reminder Alarm setting on the
Settings Page (page 3-13).
Displays whether to include heating cycle run time in systems
where the fan is used to deliver heat, for example, forced hot air
systems.
Yes to include heating cycle run time.
No to not include heating cycle run time.
Displays the date and time of the last manual reset of the Relay
Counters.
No Action (default)
Reset Counters – When selected, returns the counters to
zero value (except fan) after clicking Submit.
– mm.dd.yyyy – Date of the last manual reset of the Relay
Counters.
– hh.mm.ss – Time since last the last manual reset of the
Relay Counters.
Usage Counters Page
General
3-43