Alarm Status Screen; Figure 2-11 Nt150E/H And Nt160E/H Alarm Status Screen; Table 2-7 Alarm Status Screen Options - Proliphix Professional NT100e/h Configuration Manual

CHAPTER 2: Configuring the Thermostat Using the TDI

Alarm Status Screen

The Alarm Status screen is a sub-screen of the
This screen displays the status of both the Low and High Temperature Limits alarm
and the Filter Reminder alert.

Figure 2-11 NT150e/h and NT160e/h Alarm Status Screen

Table 2-7

Table 2-7 Alarm Status Screen Options

Field
High Humidity
(NT150e/h and
NT160e/h only)
Low Temp
Limit
High Temp
Limit
Filter Change
Alert
2-14
Beta Draft Confidential
lists the Alarm Status screen display options.
Displays
Relative Humidity above which an alarm indication is set by the thermostat.
OK – Relative Humidity has not dropped below the value set as the High
Humidity.
Not OK – Relative Humidity has dropped below the value set as the High
Humidity.
Temperature below which an alarm indication is set by the thermostat.
OK – Temperature of thermostat has not dropped below the value set as the
Low Temperature Limit.
Not OK – Temperature of thermostat has dropped below the value set as the
Low Temperature Limit.
Temperature above which an alarm indication is set by the thermostat.
OK – Temperature of thermostat has not risen above the value set as the High
Temperature Limit.
Not OK – Temperature of thermostat has risen above the value set as the High
Temperature Limit.
Indicates that the HVAC system requires service or the air handler filter needs
cleaning or replacement.
OK – Maintenance is not required.
Now – Maintenance is required.
Professional Series Network Thermostat Configuration Guide, Release 3.0
Status & Control Screen (page
Part No. 600-01000-200, Rev. 2
2-10).