Using The Phaser 540 Gx Driver; Printing From Specific Applications - Tektronix Phaser 540 Plus User Manual

Printing from specific applications

Using the Phaser 540 GX driver

1.
Install the Tektronix printer driver for the Macintosh if needed.
Refer to "Installing a driver on your computer" on page 2-28 for
instructions.
2.
Select a desktop printer.
3.
Print from the driver using one of these methods:
For QuickDraw GX applications
Select the desktop printer you want to use from the Print dialog box
(select Print from the File menu).
For non-QuickDraw GX applications
You can print to the default desktop printer from the Print dialog
box (select Print from the File menu). To change the default
desktop printer, select (highlight) the desktop printer you want to
use, then select Set Default Printer from the Printing menu.
Refer to the Phaser 540 Drivers and Utilities Printing Reference for more
information on using the Phaser 540 GX printer driver.
Refer to the Phaser 540 Drivers and Utilities Printing Reference manual for
some application-specific information.
In addition, you can get tips on printing from specific applications
(such as QuarkXPress and PageMaker) by contacting HAL or EuroHAL, the
Tektronix automated information systems. HAL and EuroHAL fax you
information immediately on applications and other topics. To receive a HAL
FAX catalog, call toll-free in the United States 1-800-835-6100, or dial direct
(503) 682-7450. For a EuroHAL catalog, and for complete information on
both HAL and EuroHAL, see "Using the automated fax systems" on
page 6-3.
Printing
3-7
User Manual
3