Reset the copy count
To reset the copy count for the imaging unit (and the corona wire, which is
included with the new imaging unit), complete these steps.
Ready
Exit
1.
Press the Menu button to enter the front panel menu. You will see
this message in the display:
Help Pages
<---
--->
2.
Press the right arrow button (---> ) until the display reads
System Counts
<---
--->
3.
Press the Menu button to enter the System Counts menu.
4.
Press the right arrow button (---> ) until the display reads
Imaging Unit
<---
--->
5.
Press the Menu button; then press the Reset button.
6.
Press the right arrow button (---> ) until the display reads
Corona Wire
<---
--->
7.
Press the Menu button; then press the Reset button.
8.
Press the
button until the display reads Ready.
Exit
Caring for Your Printer
Menu
Menu
Menu
Menu
Menu
User Manual
4
9008-20
4-11