Tektronix Phaser 540 Plus User Manual page 128

6
Troubleshooting
Troubleshooting and print quality quick reference (cont'd.)
Symptom
One dark, horizontal band
appears on the print
approximately 241 mm
(9.5 in) from the leading
edge.
Print Quality Test Page
Cyan
Magenta
Yellow
Black
Count
Image Unit 1505
Corona 487
Transfer Kit 484
Fuser 0
Front panel reports:
Transfer Kit:replace
Toner spots appear on the
backside of the media.
Light horizontal bands appear
in all colors.
Print Quality Test Page
Cyan
Magenta
Yellow
Black
Count
Image Unit 1505
Corona 487
Transfer Kit 484
Fuser 0
6-14
Phaser 540 Color Printer
Possible Causes
The media "stalled" for a few seconds
in the fuser. The cause:
Media is installed wrong side up.
Media is curled.
The fuser needs to be replaced.
The printer needs adjustment.
The transfer kit (transfer roller and
waste bin) is worn out.
The transfer kit is worn out.
The contact on the transfer roller is not
working properly.
Solution
Turn over the media in the media tray.
Replace the media.
Replace the fuser.
Call Service.
Replace the transfer kit.
Replace the transfer kit.
Call Technical Support. See page 6-1.