Insert The New Fuser - Tektronix Phaser 540 Plus User Manual

Insert the new fuser

1.
Remove the new fuser from its packaging.
Note
Save all packing material in case moving or subsequent shipment
is necessary.
2.
Using both hands, slide the new fuser into the printer. Push firmly
to seat the fuser in place.
3.
To lock the fuser, turn the small blue screw clockwise about four
turns until it is tightened.
4.
Close the right side door and the front door.
5.
Turn the power on.
Caring for Your Printer
2
User Manual
4
3
9008-32
4-15