Printing From A Macintosh; Using The Phaser 540 Driver - Tektronix Phaser 540 Plus User Manual

3
Printing

Printing from a Macintosh

3-6
Phaser 540 Color Printer
The Macintosh Driver and Printer Utilities diskette includes two Macintosh
printer drivers that allow you to select printer features.
Note
Printing from a Macintosh requires that an optional Phaser Share
card be installed in the printer.

Using the Phaser 540 driver

1.
Install the Tektronix printer driver for the Macintosh if needed.
Refer to "Installing a driver on your computer" on page 2-28 for
instructions.
2.
Select the driver in the Chooser.
3. To print a file, use the Page Setup and Print commands from the
File menu within your application:
a. In the Page Setup dialog box, select the desired paper size
from the pop-up menu so that the application uses the correct
margins for the printer. To see the choices, use the pop-up
menu to the right of the standard Paper sizes.
b. In the Print dialog box, click the TekColor button to open
the TekColor Options dialog box, in which you can select
TekColor color corrections; select print quality (Standard,
Enhanced, Fast); and select media or tray (Paper,
Transparency, Upper, Middle, Lower). For more details on
the driver, refer to Phaser 540 Drivers and Utilities Printing
Reference.