Adding Paper Or Transparencies - Tektronix Phaser 540 Plus User Manual

Adding paper or transparencies

Unpack the media tray(s). Be sure to remove all adhesive tape and
protective foam. The printer uses four different trays:
Tray
A/Letter Paper
standard
A/Letter Transparency
optional
A4 Paper
optional
A4 Transparency
optional
Note
Make sure that you load the correct media. Each tray is designed
and labeled for only paper or transparency. If you load the wrong
media type in a tray, you will get an error message.
If you have the Lower Tray Assembly installed, make sure that all
trays in the printer at any one time are the same media size
(required for the automatic tray-switching feature).
1.
To load paper or transparencies, push down on the media tray's
metal plate until it clicks, locking it in place.
Size
8.5 x 11 in.
8.5 x 11 in.
210 x 297 mm
210 x 297 mm
R
P E
P A
A 4
User Manual
2
Getting Set Up
9008-13
2-17