Connecting One Disk - Tektronix Phaser 540 Plus User Manual

Connecting one disk

Make sure that the computer, printer, and external disk are turned off before
you connect or disconnect a SCSI cable.
1.
Phaser 540 printer with a built-in SCSI terminator
2.
SCSI port
3.
External disk SCSI port
4.
Terminator (not required if the disk has a built-in terminator or if
you have a Phaser CopyStation connected at the other end of the
chain).
Each disk must have a unique SCSI ID number. Do not turn on the printer or
disk until each disk has a unique number.
Note
You must turn on the disk(s) before you turn on the printer.
Wait at least one minute after turning on the disk(s) before
turning on the printer.
1
Expanding Your Printing System
2 3 4
SCSI
9008-65
User Manual
B
B-7