Installing The Optional Lower Tray Assembly - Tektronix Phaser 540 Plus User Manual

2
Getting Set Up

Installing the optional Lower Tray Assembly

2-6
Phaser 540 Color Printer
An optional Lower Tray Assembly is available with the Phaser 540 (allowing
you to print from three trays). Follow these steps to install it.
Warning
The printer weighs about 39 kg. (85 lbs.) and the Lower Tray
Assembly weighs about 14 kg (31 lbs.). Observe standard
precautions for lifting heavy objects.
The printer is not permanently attached to the Lower Tray
Assembly. When you move the printer, move the pieces
separately; moving the printer incorrectly may damage it and
may cause personal injury.
1.
Place the Lower Tray Assembly on the table or cart you have
selected for your printer.
2.
Place the printer on top of the Lower Tray Assembly. Always keep
the printer upright.
3.
Make sure that the left and right alignment pins fit in the holes in
the base of the printer.