Tektronix Phaser 540 Plus User Manual page 143

Jam at D
1.
Open the front door to access the fuser.
2.
Pull open the access door (above the plastic
output tray). The media is visible.
3.
On the fuser, turn the large blue knob
counterclockwise.
4.
Remove the media from inside the access
door.
3
Caution
If the fuser knob will not turn, do not
force it or you may damage the fuser.
Instead, follow these steps:
Unlock the fuser by turning the small
blue knob counterclockwise.
Pull the fuser out. The media will
probably tear.
Turn the fuser's large blue knob
clockwise to release the jammed media.
Remove the jammed media from the fuser
and the printer.
OR
4
2
R
PE
A 4 PA
9008-55
1.
Open the front door and the right side door to
access the fuser.
2.
Turn the fuser's large blue knob
counterclockwise to release the jammed media.
3.
Remove the jammed media from the right side
of the printer.
1
Troubleshooting
3
2
9008-56
6-29
User Manual
6