Setting Up The Phaser 380 Gx Driver - Tektronix PHASER 380 User Manual

Getting Set Up
2

Setting up the Phaser 380 GX driver

Phaser 380 Color Printer
2-50
If you are using Apple Macintosh QuickDraw GX and System Software 7.5
or later, use the Phaser 380 GX driver to print to your Phaser 380 printer.
The Phaser 380 GX driver works with QuickDraw GX and
non-QuickDraw GX applications.
QuickDraw GX does not work with non-QuickDraw GX printer
drivers. If you want to print from non-QuickDraw GX
applications with a driver such as the LaserWriter 8.3.4, you must
Þrst disable QuickDraw GX.
Refer to the on-line manual on the printerÕs CD-ROM for details
Note
on using the Phaser 380 GX driver.
Install the printerÕs software as described on page 2-47. Select
1.
Easy Install to automatically install all of the necessary software,
or select Phaser 380 GX Driver in the Custom Install window.
Select Chooser from the Apple menu.
2.
Click the Phaser 380 GX printer driver icon on the left side of the
3.
Chooser. A list appears with the printers available on your
network. (If the printer driver icon does not appear, Restart your
Macintosh, and repeat the printer driver installation procedure;
also, check the cable connections on your computer and printer.)
Click on the Zone your printer is in. See your network
4.
administrator if you have questions.