Selecting Tekcolor Corrections From The Front Panel - Tektronix Phaser 540 Plus User Manual

3
Printing
3-12
Phaser 540 Color Printer

Selecting TekColor corrections from the front panel

Use the following steps to change the color correction mode through the
printer's front panel menu.
1.
When the printer is on and the Ready message appears, press the
Menu button. The printer displays the first selection in the menu:
Help Pages
<--- --->
2.
Using the left (<--- ) or right (---> ) arrow buttons, scroll through
the selections until the following message appears:
TekColor Correction
<--- --->
3.
Press the Menu button to access color correction selections. The
printer displays the following message:
TekColor Correction:Vivid Color*
<--- --->
4.
Using the right or left arrow buttons, scroll through the color
correction selections. An asterisk next to the selection indicates
the currently active setting.
5.
Press the OK button to confirm your selection.
6.
Return to the top level of the menu by pressing the
until the printer displays the Ready message.
For a complete list of the front panel settings, see Chapter 7. For more
detailed information on color correction, refer to the Phaser 540 Drivers and
Utilities Printing Reference.
Menu
Menu
OK
button
Exit