Connecting Multiple Disks - Tektronix Phaser 540 Plus User Manual

B
Expanding Your Printing System
B-8
Phaser 540 Color Printer

Connecting multiple disks

Make sure that the computer, printer, and external disks are turned off before
you connect or disconnect a SCSI cable.
1.
Phaser 540 printer with a built-in SCSI terminator
2.
SCSI port
3.
External disks
4.
Terminator (not required if the end disk has a built-in terminator or
if you have a Phaser CopyStation connected at the other end of the
chain). The middle disk must not have an internal terminator).
Each disk must have a unique SCSI ID number. Do not turn on the printer or
disk until each disk has a unique number.
Note You must turn on the disk(s) before you turn on the printer.
Wait at least one minute after turning on the disk(s) before
turning on the printer.
1 2
SCSI
3 4
SCSI
9008-66