Tektronix Phaser 540 Plus User Manual page 49

7.
Assign the printer to a port:
a. Select the printer from the list of Installed Printers.
b. Select the Set As Default Printer button if you want this
printer to be the default.
c.
Select the Connect button to display the Connect dialog box.
d.
In the Connect dialog box, set the Transmission Retry value to
850. Refer to your Windows documentation for details.
e. In the Connect dialog box, select a port:
Interface Select
Parallel LPT1
Serial
COM1
Network
LPTx
Note
For information on ordering options, refer to "Upgrade kits" on
page B-1.
If you selected a parallel port:
Go on to Step f .
If you selected a network port:
Click on the Network button to open the Printers –
Network Connections dialog box. Fill in each item
according to the printer's configuration page. Refer to
Windows documentation and the Phaser Share User Manual
for details, or ask your network administrator for help.
If you selected a serial port:
Click on the Settings button to open the Settings dialog
box. Fill in each item according to the printer's
configuration page, then click
documentation or ask your network administrator for help.
or LPT2
or (Requires a Phaser Share card)
COM2
or (Requires a Phaser Share card)
COMx
. Refer to your Windows
OK
Getting Set Up
2-29
User Manual
2