Contents Of Pack - Valor 4190 Installer's Manual

Carefully remove the contents. Take special care in handling the ceramic walls and the coals. Take care not to bend or
distort the slide control linkage when handling the fire front surround.
Check that all the listed parts are present and in good condition.
Fig. 4 Pack Contents
3 UNPACKING & PRELIMINARY CHECKS
The items required for this appliance are contained in two packs.
Pack 1 - Fire Unit contains:
1 Burner & Convection box Unit
with front surround
1 Nut & olive for 8mm inlet pipe
1 Ceramic back wall
1 Pair of ceramic side walls
1 Front base coal - left & right
halves
1 Rear base coal
1 Pack of 7 loose coals
2 Small "U" seals for convection
box side flanges
1 Strip of floor sealing tape
6 Fibre plugs
4 Woodscrews
2 Fire retaining cables
2 Cable clamps
4 Eyebolts
1 Knurled shoulder screw for
control linkage fixing
1 Installation template
1 Battery
1 Smoke match tube
2 Machine screws for front
surround fixing
1 Literature pack
Pack 2 - Fire Front contains:
1 Fire front surround with
sliding control
1 Fire front casting
1 Bottom front cover casting
8