2.9.5
IXP2400 CBUS Connections
After you have configured the packet simulation with devices and ports and created or imported
data streams, you need to specify the connections to the media/switch fabric for each chip in your
project.
1. On the Simulation menu, click System Configuration, then click the CBUS Connections
tab.
The CBUS Connections property page appears. The page contains a check box to enable
connections using the CBUS. When you select Connect using the CBUS the receive (ingress)
and transmit (egress) pull down boxes are active.
2. Select the chip to which you want to make connections in the pull down boxes.
3. When you have finished click OK.
Figure 13
Figure 13. CBUS Connections Property Page - IXP2400
Development Tools User's Manual
displays the CBUS Connections property page.
IXP2400/IXP2800 Network Processors
Developer Workbench
67