Table of Contents
Advertisement
IXP2400/IXP2800 Network Processors
Developer Workbench
Figure 3. Specify Debug-only UOF Files Dialog Box
2.3.2
Opening a Project
To open an existing standard project:
1. On the File menu, click Open Project.
The Open Project dialog box appears.
2. Browse to the folder that contains the project file (*.dwp) for the project you want to open.
3. Double-click the project filename or select the project filename and click Open.
Once open, the processor type is displayed in the status bar, as shown below:
You can also select a project from the most recently used list of projects, if it is one of the most
recent four projects opened.
1. On the File menu, click Recent Projects.
2. Click the project file from the list.
Note: Opening a project automatically closes the currently open project, if any, after asking you if you
want to save changes if there are any.
2.3.3
Saving a Project
To save a modified project:
•
On the File menu, click Save Project.
This saves all project configuration information, such as debug settings to the project file. If your
project hasn't been modified, the Save Project selection is unavailable. Also, on the File menu,
click Save All to save all files and the current project.
The project is saved in the folder that you specified when you created it. If you opened an existing
project, it is saved in the folder from which that you opened it.
28
Development Tools User's Manual
Advertisement
Table of Contents
