Thread Window Controls; The Assembler Thread Window - Intel IXP2400 User Manual

2.13.8.2

Thread Window Controls

Assembled Thread Windows:
If a thread is in a Microengine whose list file is generated by the Assembler, then its thread window
displays a 'list' view. This represents flattened code for the entire microstore, as contained in the
.list file.
Note: Setting and clearing breakpoints (see
Section 2.13.11), and viewing the instruction(s) currently being executed are also done in
assembled thread windows.
Figure 35. The Assembler Thread Window
When a thread is being displayed in an assembled thread window, the toolbar contains the
following controls:
•
The Chip list box. This control is not visible if your project has only one chip.
•
The Microengine list box. This control is disabled if you are using one thread window per
Microengine or you are using a separate thread window for each thread.
•
The Thread list box. This control is disabled if you are using a separate thread window for
each thread.
The toolbar contains following buttons:
Development Tools User's Manual
Section
Track Active Thread (see
Display the Thread Window Options dialog box (see
Step Over (see Section 2.13.9.3).
Run to Cursor (see Section
Expand macros (see Section
IXP2400/IXP2800 Network Processors
2.13.10), displaying register contents (see
Section 2.13.8.3).
2.13.8.4).
2.13.8.7).
Developer Workbench
Section 2.13.8.1).
117