Intel IXP2400 User Manual page 96

IXP2400/IXP2800 Network Processors
Developer Workbench
To create one or more frames:
1. Click Create Frame(s).
2. Click Custom Header.
3. Type the data for the custom header in the Custom header box.
4. Click Ethernet Header (go to
5. Click IP Header (go to
6. Click Data Payload (go to
7. Specify the frame size in the Frame size (in bytes) area (see
8. Type the number of frames you want to create in the Number of new... box.
9. Click Create.
The number of frames you specified are created and added to the data stream. The dialog box
remains active so you can change settings and create additional frames.
10. When you are finished creating frames click Close.
11. When you are finished creating the data stream, click OK.
The Save dialog box appears.
12. Type in the file name if you want to change it.
13. Browse to the folder where you want to save the file.
14. Click Save.
15. In the Data Streams dialog box, click OK.
Edit:
To edit a Custom Ethernet TCP/IP data stream:
1. On the Simulation menu, click Data Streams....
The Data Streams dialog box appears.
2. Select stream that you want to edit.
3. Click Edit Stream.
The Custom Ethernet TCP/IP Data Stream dialog box appears.
4. Click Create Frame(s) to create a new frame.
5. Click Edit Frame(s) to edit the:
— Custom Header
— Ethernet Header (go to
— IP Header (go to
— Data Payload (go to
6. Click Delete Frame to delete the selected frame.
7. Click the Up and Down arrows to change the order of the frames.
8. Click OK when done.
96
Section 2.12.8).
Section 2.12.9).
Section 2.12.11).
Section 2.12.8)
Section 2.12.9)
Section 2.12.11)
Section 2.12.12).
Development Tools User's Manual