Intel IXP2400 User Manual page 116

IXP2400/IXP2800 Network Processors
Developer Workbench
Whether or not you can select an option depends on the current thread window configuration. For
example:
•
If you have one or no thread window open, then all options are allowed.
•
If you have two thread windows open, you cannot select option (a).
•
If you have two or more thread windows open for different Microengines in the same chip, you
cannot select option (a) or (b).
•
If you have two or more thread windows open for different threads in the same Microengine,
you cannot select option (a), (b) or (c).
•
If you select an invalid option and click OK, the following message box appears:
— If you click No the option reverts to the previous selection.
— If you click Yes the Workbench closes the appropriate thread windows.
The activation option you select determines the behavior of the thread-selection toolbar.
•
If you select option (d), all combo boxes are disabled.
•
If you select option (c), the chip and Microengine combo boxes are disabled, allowing you to
select a different thread.
•
If you select option (b), the chip combo box is disabled, allowing you to select a different
Microengine and thread.
•
If you select option (a), all combo boxes are selected, allowing you to select a different chip,
Microengine and thread.
•
If the open project has only one chip, the chip combo box is hidden in order to save toolbar
space.
In the next area of the Thread Window Options dialog box:
3. Select Track active thread in new thread windows if desired (not available if you selected to
view each thread in its own window).
4. Select Expand macro references when an 'assembled' thread is activated for the first
time if desired.
5. Select Show list view in new 'compiled' thread windows if desired.
6. Select Display instruction addresses if desired (in list view only).
7. Click OK when done.
116 Development Tools User's Manual