The Compiled Thread Window - Intel IXP2400 User Manual

IXP2400/IXP2800 Network Processors
Developer Workbench
Note: Not all buttons are available in hardware mode.
Compiled Thread Windows:
Compiler thread windows look the same as Assembler thread windows but have some differences.
Display options are similar (see
Note: Setting and clearing breakpoints (see
(see Section
Compiler thread windows. They cannot be performed in the source file windows.
Figure 36. The Compiled Thread Window
When a thread is being displayed in a compiled thread window, the toolbar contains the following
controls:
•
The Chip list box. This control is not visible if your project has only one chip.
•
The Microengine list box. This control is disabled if you are using one thread window per
Microengine or you are using a separate thread window for each thread.
•
The Thread list box. This control is disabled if you are using a separate thread window for
each thread.
•
The Source list box (if in source view). Here you can view any of the *.c files used to generate
the .list file. When Microengine execution starts then stops, the Workbench changes the
displayed source file to the one that generated the current instruction.
The toolbar contains following buttons:
118
Collapse macros (see
Section
Section
2.13.11), and viewing the instruction(s) currently being executed are also done in
Track the active thread (see
Display the Thread Window Options dialog box (see
Section 2.13.8.7).
2.13.8.1).
2.13.10), displaying register contents
Section 2.13.8.3).
Development Tools User's Manual
Section 2.13.8.1).