1.18
Fan Power Connections
•
One processor fan connector
•
One PCH fan connector
•
One 3-wire auxiliary fan connector
1.19
On-Board Switches
The CRB has the following momentary push-button switches to provide state control:
•
System power button (S6A1)
•
System reset button (S7A1)
1.20
Supported Operating Systems
The CRB is validated with the following operating systems:
•
Microsoft* Windows Embedded Standard 7 SP1 (32-bit and 64-bit)
•
Windows Server 2008 R2 with SP1 (64-bit)
•
FreeBSD* 8.2 (32-bit and 64-bit)
•
Fedora* 16 (32-bitt and 64-bit)
Operating systems must be obtained by the customer. They are not distributed with
the CRB kit.
1.21
BIOS Features
The BIOS has an AMI* core with the following components:
Table 14.
Supported BIOS Features
BIOS Component
PCI 2.3
Serial ATA boot
CD-ROM boot
USB boot
Floppy boot
PCI Express
USB
CMOS Header
ECC support
Watchdog Timer
(WDT)
APIC and ACPI
Control
®
®
Intel
Xeon
Processor E3-1125C with Intel
User Guide
18
The BIOS is compliant with the PCI Local Bus Specification, Rev. 2.3.
The BIOS supports booting from a Serial ATA hard drive.
The BIOS supports booting from a Serial ATA CD-ROM.
The BIOS supports booting from a USB boot device.
The BIOS supports booting from a floppy drive
The BIOS initializes and supports PCI Express cards that are plugged into the CRB.
The BIOS supports the USB 1.1 and USB 2.0 interfaces.
The BIOS supports recognizing the clear CMOS header.
The BIOS detects and supports ECC memory.
The BIOS provides watch dog timer support.
The ability to enable and disable APIC and ACPI is present in the BIOS. Control is
also required for OS plug-and-play features. The BIOS supports the following ACPI
states:
®
Communications Chipset 8910 Development Kit
Crystal Forest—Introduction
Description
Order No.: 328009-001US
continued...
October 2012