Table of Contents
Advertisement
typical reference design. For low performance hosts, a more reasonable setting is 100,000
cycles.
Note: These options must be specified before you start debugging. If you are already in debug mode,
these selections are disabled.
Disable:
To disable history collecting:
1. On the Simulation menu, click Options.
The Simulation Options dialog box appears.
2. Click the History tab.
3. Clear Enable history collecting.
Figure 51. History Dialog Box
2.13.18
Thread Status
The Thread Status window provides static or snapshot information on the status of each thread in
a selected chip in your project. For each thread, the following information is displayed:
— Current instruction address.
— The list of events for which the thread is waiting.
— The list of events which have been signaled to the thread.
Development Tools User's Manual
IXP2400/IXP2800 Network Processors
Developer Workbench
167
Advertisement
Table of Contents
