Table of Contents
Advertisement
IXP2400/IXP2800 Network Processors
Developer Workbench
In the receive ports list, the Workbench displays the input that is assigned to each port configured
for the connected device. It shows either the name of the DLL that is to supply input data to the
port or the data streams assigned to supply input data. In the latter case, the method by which
packets are selected from the streams is shown in brackets after the stream names. If no input is
assigned, the area is blank.
Figure 25. Packet Simulation Options (IXP2400 and IXP2800) - The Traffic Assignment Tab
To assign the port input:
1. Select the port in the Receive Ports area of the Traffic Assignment property page.
2. Click the Assign Input... button.
The Assign Input to Port dialog box appears (see
84
Figure
26).
Development Tools User's Manual
Advertisement
Table of Contents
