IXP2400/IXP2800 Network Processors
Developer Workbench
2.2.3.5
Customizing Menus
You can change the appearance of the main menu or you can put menus on toolbars.
Main Menu Appearance:
To change the order of the main menu items:
1. On the Tools menu, click Customize.
The Customize dialog box appears.
2. Drag any main menu item to the new position on the main menu bar. For example, drag File
and drop it after Help.
3. To remove a menu from the main menu bar, drag it into the work area below.
4. To add a menu to the main menu bar:
a. In the Customize dialog box, click the Commands tab.
b. Click Menu in the Commands box.
All the menus appear in the Buttons box.
c. Select a menu and drag it to the main menu bar.
That menu then becomes a new menu on the main menu bar.
Menus on Toolbars:
To put a menu on a toolbar:
1. In the Customize dialog box, click the Commands tab.
2. Click Menu in the Categories box.
All the menus appear in the Buttons box.
3. Drag any menu to any toolbar.
Note: You can put your most used or favorite menus on a floating
toolbar by creating a new toolbar (see example at right) and
dragging the menus to that toolbar.
2.2.3.6
Returning to Default Toolbar Settings
To set toolbars to their default configurations:
1. On the Tools menu, click Customize.
The Customize dialog box appears.
2. Click the Toolbars tab.
3. Select the desired toolbar and click Reset.
Only the Workbench default toolbars can be reset.
24
Development Tools User's Manual