Standard Displays - Bosch D1260 Owner's Manual

Appendix

Standard Displays

Standard Displays
Your command center uses standard and custom displays to show the status of the security system. Many standard
displays are described below. Your system may not use all of them. Descriptions of your custom text follow.
System Command
Displays when you press the COMMAND key. The system is
waiting for you to enter a one or two digit number to complete the
command.
Enter Passcode to Disarm
When the system is turned on,
entering through a delay door starts
entry delay time.
The command center emits a tweedle tone and alternates between Enter Passcode and press the ENTER key to
disarm and AREA 1 WAREHOUSE is in entry delay. (AREA 1 WAREHOUSE is used as an example.)
You must turn off the system before entry delay time expires to avoid creating an alarm event.
Exit Now
Arming your system starts exit delay
time. The command center emits a
repeating beep tone and displays
AREA 1 WARE HOUSE is now
arming for 3 seconds and then
displays Exit Now!.
No Authority
The system does not recognize the passcode entered.
Not Authorized
The passcode entered does not have the authority to perform the
function requested.
Perimeter Delay
Indicates that the perimeter is armed (turned on) with entry/exit
delay time. (See Turning On the System With Delays )
D1260 Owner's Manual
© 2003 Bosch Security Systems 50410C