Bosch D1260 Owner's Manual page 56

Part III: Advanced Commands
BYPASS A POINT? (COMMAND + 0)
or the ENTER button.
If you don't know the number of the point you wish to
bypass, you can view the list of devices that can be
bypassed by pressing the Next> soft key.
Continuously pressing Next> scrolls through the available points that can be bypassed.
When the point text of the point you wish to bypass
appears, press the Bypass> soft key
8. One of the following messages displays (FRONT DOOR is used here as an example):
•
FRONT DOOR is not bypassed indicates the point
is not bypassed and the option is given to bypass
it.
•
FRONT DOOR is now bypassed. indicates the
point was successfully bypassed.
•
FRONT DOOR is already bypassed. indicates that
the point has already been bypassed.
•
FRONT DOOR cannot by bypassed. indicates the
system is programmed not to allow that point to
be bypassed.
•
Invalid point Please try again. indicates that the
entered point doesn't exist and the display returns
to allow another point to be entered.
•
No additional points. indicates that there are no
more points that can be bypassed.
9. You can return to idle text by pressing <Exit.
10. If the bypassed point is a
24-hour point, the
message 24Hr Point
Bypassed begins
alternating in the display
with A1 AREA IS OFF.
50410C
D1260 Owner's Manual
© 2003 Bosch Security Systems