Bosch D1260 Owner's Manual page 97

Part III: Advanced Commands
ADD/CHANGE USER (COMMAND + 5 + 6)
6. If the card is accepted,
the display changes to
either Card added. or
Card changed if the
card already exists in
your system.
Pressing the <Exit soft key exits out of this function and returns the display to the main Add /
Change User display.
Pressing the Next> soft key exits out of this function
and returns the display to Add/Change Passcode
depending on if a passcode already exists for the user.
D1260 Owner's Manual
© 2003 Bosch Security Systems 50410C