Bosch D1260 Owner's Manual page 114

Part IV: Multi-Area Use
View Point Status
7. After pressing the Status> key, the command center
will display the following information:
Definitions:
Line 1
Line 2
Line 3
50410C
Area name
Area #, Pt # Area # - This may display numbers 1 through 8.
Pt # - This may display point numbers 1-127 and 129- 247,
<Point State), HW Normal – indicates that the point is not in the faulted state.
Open – indicates that the point is in an open state.
Short – indicates that the point is in a shorted state.
Missing – indicates that the point is missing.
D1260 Owner's Manual
© 2003 Bosch Security Systems