Turning On The System; Turning The System Off - Bosch D1260 Owner's Manual

Turning On the System

Turning on Selected Areas
Areas covered in the scope of the command center can be armed individually by accessing the Master Arm function
through the menu.
1. Press the Menu> key to enter the Command Menu.
2. Press the Next> soft key repeatedly until you reach the
MASTER ARM ?> prompt then press the adjacent soft
key.
3. You will prompted for your passcode. It will appear on
the display as asterisks (*).
4. The display changes and shows MASTER ARM ALL ?
with the following options:
•
<Previous soft key – will scroll to the last area that
can be armed (based on passcode and authority
level)
•
Next> soft key – will scroll to the first area that can be armed (based on passcode and authority
level)
•
Arm> soft key – will arm all areas (based on passcode and authority level)
•
<Exit soft key – will return the display to idle text
5. If the Next> soft key is pressed, the first area that can
be armed (based on passcode entered and user
authority level) is displayed.
(AREA 1 WAREHOUSE is used an example of the first
area that can be armed)
6. Pressing the Arm> soft key will cause AREA 1 WAREHOUSE is now arming... to display for 3
seconds before the prompt to arm the next available area is displayed.
7. Once all available areas have been displayed, the
display returns to MASTER ARM ALL ?
© 2003 Bosch Security Systems
D1260 Owner's Manual
Part IV: Multi-Area Use
Turning On the System
50410C