Bosch D1260 Owner's Manual page 108

Part III: Advanced Commands
SERVICE MENU ? (9 + 9 + Enter)
2. During the Walk Test you may want to see the points
that remain untested by pressing the View untested
pts> soft key.
The display shows ### pts untested.
Press the Point information> soft key to see
information about specific points that have not yet
been tested.
The display changes to show the information for that
point.
Move through this list by pressing the Next Point>
soft key.
Press the <Exit soft key to return to the ### points
remain to be tested. before continuing the Service
Walk Test.
3. When all points have been tested, 0 points remain to
be tested is displayed.
Press the <Exit soft key.
The display momentarily shows All points have been
tested.
before returning to idle text.
Using Default Text
This function allows the current state of the area for 3 seconds before returning to idle text.
1. Press the Default Text?> soft key to display the current
state of the area.
2. The current state of the area is displayed for 3 seconds
before returning to idle text.
50410C
D1260 Owner's Manual
© 2003 Bosch Security Systems