Bosch D1260 Owner's Manual page 70

Part III: Advanced Commands
DOOR CONTROL (COMMAND + 4 + 6)
Cycle Door
1. If you wish to momentarily unlock an access door to
allow a person into an area, press the Cycle Door> soft
key.
2. The display will read *Cycle Door*1 2 3 4 5 6 7 8 if all
door are at a normal state and are available.
If a door is not at a normal state, the
number of the door would be replaced
with a symbol indicated in the table:
3. Enter the number of the door you wish to cycle then press the ENTER key. This door
will be cycled and the display will change to reflect the new status of the doors.
For example, if you wanted to cycle Door 3, press 3
then press the ENTER key.
The display changes to show that all the doors are at a
normal state except for Door 3, which is cycled.
4. Enter another door number to cycle or press the Exit>
soft key to leave this function.
Unlock Door
1. If you wish to unlock an access door to allow free
access, press the Unlock Door> soft key.
2. The display will read *Unlock Door*1 2 3 4 5 6 7 8 if all
door are at a normal state and are available.
If a door is not at a normal state, the
number of the door would be replaced
with a symbol indicated in the table:
3. Enter the number of the door you wish to unlock then press the ENTER key. This door
will be unlocked and the display will change to reflect the new status of the doors.
For example, if you wanted to unlock Door 3, press 3
then press the ENTER key.
50410C
Symbol Meaning
- Door is not active, in scope, or user does not have
access level authority.
C Door is on timed door sequence.
U Strike and shunt are latched active (held open).
X Strike and shunt are deactivated (secured).
F There is a problem with the door. Call your security
company.
Symbol Meaning
- Door is not active, in scope, or user does not have
access level authority.
C Door is on timed door sequence.
U Strike and shunt are latched active (held open).
X Strike and shunt are deactivated (secured).
F There is a problem with the door. Call your security
company.
D1260 Owner's Manual
© 2003 Bosch Security Systems