Bosch D1260 Owner's Manual page 52

Part II: System Commands
Special Alerts (COMMAND + 7 and COMMAND + 9)
Using COMMAND 9:
1. Ensure your command center shows idle disarmed
text.
2. Press the COMMAND key.
3. The display shows *System Command*.
4. Press the 9 key.
Note: If you prefer, you may use the Command Menu in place of steps 2 and 3 to initiate this function.
Press the Menu> soft key to enter the Command Menu,
then press Next> soft key repeatedly
until you reach the USER CMD 9 ?> prompt then press the
adjacent soft key.
Your COMMAND 9 special alert has been programmed to:
5.
Description:
50410C
notify your alarm company
ring a bell on your premises
display at your command center
D1260 Owner's Manual
© 2003 Bosch Security Systems