Standard Displays - Bosch Security System User Manual

Standard Displays

Your keypad uses standard and custom displays to show the status
of the security system. Many standard displays are described here.
Your system might not use all of them. Descriptions of your custom
text follow.
SYSTEM COMMAND
Displays when you press the COMMAND bar. The system is
waiting for you to enter a one or two digit number to complete
the command.
DISARM NOW
When the system is turned on, entering through a delay door
starts entry delay time. The keypad emits a tweedle tone and
displays DISARM NOW.
You must turn off the system before entry delay time expires to
avoid creating an alarm event.
EXIT NOW
Arming your system starts exit delay time. The keypad emits a
repeating beep tone and displays EXIT NOW.
NO AUTHORITY
The system does not recognize the passcode entered.
NOT AUTHORIZED
The passcode entered does not have the authority to Force Arm.
PERIMETR DELAY
Indicates that the perimeter is armed (turned on) with entry/
exit delay time. (See Turning the System On With Delays.)
PERIMETR INSTANT
Indicates that the perimeter is armed (turned on) without
entry/exit delay time. (See Turning the System On Without
Delays.)
FIRST DISARM
Indicates that the function requested can only be performed when
the area is disarmed. Disarm the area to perform the function.